The NPT Series of quick couplings offered by Turkish manufacturer, Oleocon Hydraulic, features flat surfaces that are easy to clean. Thus, the entry of extraneous particles into the hydraulic system is minimized. Other benefits include:
• imperviousness at minimum levels and is environmentally sensitive
• by keeping the air inlet at minimum levels during connection, this aids the laminar flow of the fluid
• laminar flow reduces internal turbulence and reduces pressure drops, maintaining the circuit effectively
• strong resistance against impact pressure during connection
• compact fine design and
• safe and simple use.
To use, before connection, the connection surfaces must be fully cleaned to prevent extraneous particles inside the system. To connect, the male and female parts are positioned against each other; they must match exactly to each other. If one of the parts is fixed, the other must be free to tolerate running/thickening. After the connection, the safety lock is positioned by turning the outer socket. This mechanism prevents accidents that may occur by seperating the couplings from each other. To disconnect, the outer socket is re-positioned against the safety lock ball and the socket is retracted towards.
Notes:
• make sure the oil in the system is clean
• do not expose the female side of the coupling to pressure with no connection
• do not remove and install when the temperature of the fluid circulation is greater than 80° C / 176° F
• make sure the system pressure is below the permitted working pressure
• make sure all filters and cooling systems are working properly, and
• do not disassembly assemble while the system is floating or the system is under dynamic pressure.
Oleocon Hydraulic
www.oleocon.com.tr
Leave a Reply