Kurt Hydraulics’ full line of thermoplastic hose and R7 couplings are perfect for a vast range of applications. Manufacturers looking for durable hydraulic hoses that can easily flex during operation can trust Kurt Hydraulics complete line of SAE 100 R7, R8 and R18 thermoplastic hydraulics hoses. SAE R100 R7 is a nylon hose ideal for […]
Hydraulic
Hose connection termination
Lok-IT is an easy-to-assemble termination solution used on hose connections in mining, off-shore, oil and gas and waterblast applications. Available from 3/8 to 6 in., the system allows users to connect and disconnect hoses in just a few seconds without any tools. The connections are easy to assemble, offering slim and short-built sizes. In case […]
Flat face couplings with 90° angles
H90 series flat face couplings from Holmbury Inc., Eastlake, Ohio, feature a 90° angle for high-pressure impulse applications where the envelope size is restricted. They are designed in accordance with the ISO 16028 standard. The right-angle design also allows for easy mounting without the need for swivel joints additional fittings, thus reducing leakage paths and […]
Ryco Bitelok Couplings Eliminate the Need to Skive Hoses
Ryco Bitelok One-Piece Crimp Couplings have the ferrule already attached to the hose insert at the factory. This eliminates the possibility of selecting the wrong ferrule type when fabricating hose assemblies, which can cause failure of the assembly. Each coupling series suits specific styles of hose. The T1000, T2000, T4000, T7000 and T9000 series of […]
Holmbury P Series Couplings Minimize Risk of Hose Rupture
Holmbury Push Pull Female Couplers meet the ISO 7241-1 type A design criteria and are intended for any application where the hydraulic hose could be subjected accidentally to excessive force. The design is such that when pulled, the couplings will separate automatically – in order to minimize the risk of hose line rupture or coupling […]
Holmbury HQ Series Couplings Prevent Oil Lose and Air Inclusion
HQ Series Couplings are designed to be used in dirty environments and where oil loss or air inclusion cannot be tolerated on connection or disconnection. The flat face feature allows the operator to clean the coupling surfaces to prevent contamination from entering the system. Typical applications include skid steer attachments, excavator hammer circuits, hydraulic hand […]
Faster WF Couplings Offer Pressure Tight Connections
These couplings have been designed to allow quick, safe and pressure tight connections directly into BSPP internal threads. In addition to very compact dimensions, internal shut-off valve and 35 MPa working pressure (with safety factor of at least 1:2), WF couplings can be easily connected by simply pushing the coupling into the threads and just […]
Flat Face High-Pressure Couplings Help Enhance Safety
Flat face couplings have been designed for all those applications where, for safety reasons or environmental care, it is absolutely necessary not to leak oil during connection and disconnection. Characterized by an extreme ease of cleaning, they are the ideal product for applications in dusty and dirty environments. The FFHP series of couplings from Faster […]
FET Series Provides New Level Of High-Pressure Confidence
With the introduction of its FET Series High Pressure Non-Spill Quick Couplings, Parker Hannifin Corporation, global in motion and control technologies, offers a new level of coupling performance for even the most demanding hydraulic applications in industries such as construction, oil & gas and mining. Parker’s FET Series couplings are ideal for high-pressure (up to […]
