• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Hose Assembly Tips

Fluid Power Resources for Hose and Hose Assemblies

  • Hose Assembly Blog
  • Industry News
  • Hydraulic hose
    • Rubber
    • Thermoplastic
  • Pneumatic tubing
  • Fittings
    • Hydraulic
    • Pneumatic
  • Couplings
    • Hydraulic
    • Pneumatic
    • Quick-acting
  • Suppliers
  • Design Guides
    • Design Guide Library
    • Electro-Pneumatic Regulator & Flow Controller Design
    • Hydraulic Cylinders
    • Hydraulic Filtration
    • Hydraulic Hose Assembly
    • Hydraulic Pumps
    • Hydraulic Valves
    • Pneumatic Actuators
    • Pressure Gauges

Michelle DiFrangia

Proper Hose Assembly Guidelines, Part 6 – End Selection

May 15, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following excerpt from that webinar transcript is the sixth part of the series. Ends are literally the fittings that you’re going to be attaching to the hose […]

Filed Under: Hose Assembly Blog

The importance of pressure in hydraulic hose assemblies

May 14, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following excerpt from that webinar transcript is the fifth part of the series. Probably the most important when it comes to consideration of hydraulic hose is pressure. […]

Filed Under: Hose Assembly Blog

Machines for bending stainless and carbon steel

May 13, 2016 By Michelle DiFrangia Leave a Comment

With more than 30 years of experience within the hose and tube processing equipment industry, OP now offers a complete range of products particularly suitable for tube processing: machines for bending stainless (AISI 316TI) and carbon steel (ST 37.4) tubes with diameter between 5 and 50 mm; 37° and 90° flaring machines for hydraulic rigid […]

Filed Under: Pneumatic tubing Tagged With: O+P

Inspection kit detects hydraulic fluid leaks and injection injuries

May 13, 2016 By Michelle DiFrangia Leave a Comment

Spectroline’s SafetyBlu (SB-450) Blue Light Inspection Kit is the only hydraulic system maintenance tool that saves you money two ways. Not only can SafetyBlu help find expensive hydraulic system leaks, it also helps detect and prevent dangerous injection injuries. Featuring a portable, high-intensity blue light (450 nm) LED flashlight, when used in conjunction with the […]

Filed Under: Industry News Tagged With: spectroline

Proper Hose Assembly Guidelines, Part 4 – Application Considerations

May 13, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following excerpt from that webinar transcript is the fourth part of the series. Application discusses the nuts and bolts, the details of how your hose assembly is […]

Filed Under: Hose Assembly Blog

Proper Hose Assembly Guidelines, Part 3 – Effects of Temperature

May 12, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following excerpt from that webinar transcript is the third part of the series. The second part of STAMPED is temperature. Temperature is an important consideration. Every application […]

Filed Under: Hose Assembly Blog

Proper Hose Assembly Guidelines, Part 2 – STAMPED

May 11, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following excerpt from that webinar transcript is the second part of the series. The STAMPED acronym stands for size, temperature, application, material, pressure, hose ends and considerations […]

Filed Under: Hose Assembly Blog

Proper Hose Assembly Guidelines – Introduction

May 10, 2016 By Michelle DiFrangia Leave a Comment

Fluid Power World Contributing Editor Josh Cosford gave a webinar presentation on Proper Hose Assembly Guidelines. The transcript has been divided into an 8-part blog post series. The following is an excerpt from that webinar transcript. Hydraulic hoses exist on nearly every hydraulic machine, that’s obvious. It is critical to ensure hose assemblies are fabricated […]

Filed Under: Hose Assembly Blog

Continental introduces Legacy line of hose at NAHAD 2016

May 9, 2016 By Michelle DiFrangia Leave a Comment

With a focus on the food and beverage industry, Continental recently introduced the Legacy line of industrial hose to the North American market and distributors who attended the National Association for Hose and Accessories Distribution (NAHAD) conference. Included in the Legacy line are seven hoses and a water-saving nozzle that will complement the current portfolio […]

Filed Under: Hydraulic hose, Industry News Tagged With: contitech

O+P continues growth in times of uncertainty

May 6, 2016 By Michelle DiFrangia Leave a Comment

Even with the current downward trend of the oil and gas industry, O+P continues to see an upward trend in its U.S. and China branches. Five years after the birth of the first foreign office, O+P confirms its role of decisive player in the international market of hose and tube processing equipment. This is all […]

Filed Under: Industry News Tagged With: O+P

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to page 5
  • Interim pages omitted …
  • Go to page 8
  • Go to Next Page »

Primary Sidebar

Subscribe

Fluid Power World Digital Edition

Fluid Power World Digital Edition

Browse the most current issue of Fluid Power World and back issues in an easy to use high quality format. Bookmark, share and interact with the leading design engineering magazine today.

Follow Paul on Twitter

Tweets by @wtwh_paulheney

Follow Mary on Twitter

Tweets by @DW_MaryGannon

Footer

Hose Assembly Tips

FLUID POWER WORLD NETWORK

  • Fluid Power World
  • Mobile Hydraulic Tips
  • Pneumatic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

HOSE ASSEMBLY TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • About us
Follow us on Twitter  Add us on Facebook  Follow us on LinkedIn  Follow us on YouTube  Follow us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy