Brennan’s entire instrumentation tube fittings line is now ASTM F1387 certified. The fittings have passed rigorous testing including pneumatic proof, hydrostatic proof, impulse, flex fatigue, tensile, burst, repeated assembly, thermal cycling, elevated temperature soak and vibration testing. This means that Brennan instrumentation fittings are proven to perform under the toughest conditions without leaks or failures. Ask […]
ContiTech plant announces $7.2M expansion
ContiTech has announced a $7.2M expansion of its industrial hose plant in Mount Pleasant, Iowa, responding to the increasing demand for industrial hoses in the NAFTA region. “We have plans to add 30,000 square feet to our plant, and that includes an additional production line, which will increase our total floor area and our capacity by […]
Ultra-miniature threaded dry-break quick disconnect minimizes dead volume between internal and external ends
The ultra-miniature Beswick M3 threaded dry-break quick disconnect is precisely manufactured from corrosion resistant stainless steel and is rated to 500 psig when connected. Buna-N is the standard seal material. Viton and EPDM are optional and can handle many types of fluids. Other elastomers are available upon request. The dry-break, also referred to as “no-spill” (however […]
What does STAMPED stand for?
STAMPED defines the seven major areas of information required to provide a quality hose assembly for the customer. The acronym stands for size, temperature, application, materials/media, pressure, end and delivery. Size, I.D., length and O.D. constraints The overall length should be specified to include fittings, and tolerances need to be specified if special requirements exist. To determine the replacement […]
What is the difference between NPT and NPTF?
NPT stands for National Pipe Taper. For NPT, pipe should be thread per ANSI B1.20.1. For the National Pipe Tapered for Fuels, or NPTF, the pipe should be thread as per ANSI B1.20.3. Differences in NPT and NPTF threads lie in the major and minor diameters, as well as the root and crest of the threads. NPTF thread […]
Can I use hose and fittings from different manufacturers in the same system?
The short answer is “no.” Here’s why: Mixing and matching components from different manufacturers is the traditional way of life for many industrial hose distributors and end-users, but this approach to making hose assemblies leaves fabricators and users open to greater liability than ever before. The “right” components for safe, long-lasting hydraulic assemblies are couplings, hoses, and crimping equipment […]
How do I prevent hose whip?
Hose whip occurs when a pressurized hose breaks free from its fitting or connection point and whips around violently. This can cause damage to nearby equipment or injury to operators. Using a hose whip restraint system prevents whipping of a pressurized hose in the event of a hose separation/failure. The systems usually have two parts: a hose collar and […]
Motion Industries announces agreement to acquire Moss Rubber And Equipment
Motion Industries, a wholly owned subsidiary of Genuine Parts Company, has entered into a definitive agreement whereby Motion Industries has agreed to acquire Moss Rubber and Equipment. Execution of the transaction is expected to take place immediately. Moss Rubber and Equipment has been a leading supplier of quality industrial rubber products since 1965. Moss specializes […]
New swivels are leak-resistant and endure heavy side loads
Taimi celebrates 10 years of innovations by introducing its next generation of in-line and cartridge-style swivels. The T2 features increased durability, increased operating pressure up to 6,250 psi and lower rotating torque. Featuring Taimi’s Pressure Spike Protection, the ball-less swivels are designed to be leak resistant, endure heavy side load, high pull force, and the high […]
Version 1.2 of the Hose Safety Institute Handbook released
Version 1.2 of the Hose Safety Institute Handbook is available. It includes new copies that may be purchased on the NAHAD website and an update pack for any existing copies. This version provides a comprehensive set of minimum performance recommendations for the specification and design of industrial, composite, hydraulic, corrugated metal and fluoropolymer hose assemblies, as […]